广东中山福莱特涂料公司专业生产销售： |黄**15876091220| QQ:3274453293天然真石漆|水包水多彩漆|岩片漆｜质感漆|水性氟碳漆｜防水涂料|隔热涂料｜弹性拉毛漆｜水性金属漆


应当注意的质量问题：
Should pay attention to the quality problem:


1、面层出现楞子现象： 主要原因是在现浇砼施工中，由于模板接缝所造成楞子，因此在面层施工以前，抹灰工序要对这些接缝进行修正，达到抹灰面的标准。以避免面层施工后出现此现象。
1, the surface appears stare blankly a phenomenon: in the c**truction of cast-in-situ concrete is the main reason is that, due to the template seam caused stare blankly, therefore before surface c**truction, the rendering process correction to the seams, reach the standard on the surface of the plaster. In order to avoid the surface after c**truction appear this phenomenon.
2、空鼓和裂缝现象： 主要的原因是由于底层抹灰没有按工艺要求施工所造成的，因此在施工前，应按水泥砂浆抹灰面交验的标准来检查验收墙面，否则，面层平涂不能施工。
2, empty drum and fracture phenomenon: the main reason is because the underlying plaster is not caused by c**truction according to the requirements of process, therefore, before c**truction, should according to cement mortar plaster surface produce standard to check acceptance of metope, otherwise, the surface coating can't c**truction.
3、接槎现象： 主要原因是由于涂层重叠，面漆深浅不一所。造成因此在施工中要避免接槎现象，可采取以下措施。
3, if phenomenon: the main reason is due to the overlapping coating, paint shades. Therefore in the c**truction to avoid meet if phenomenon, can take the following measures.


◆ 应把接槎甩在分格**。
Pieces should be the answer if in frame line.
◆ 施工**一次成活，不要修补，这就需要层层验收，严把质量关，以免造成接槎现象。
Mixer c**truction a survival, best not to repair, which requires layers of acceptance, strictly the quality pass, lest cause if phenomenon.